Walking out of a steamy shower into a freezing bathroom is something none of us enjoy. A heated bathroom exhaust fan fixes that in one ceiling fixture, venting humidity while radiating warmth into the room.
I have spent the last three months helping our team test ten of the best bathroom exhaust fans with heaters on the market, measuring airflow, listening for rattles at 6 a.m., and timing how fast each unit raises the room temperature by 10 degrees. This guide breaks down the winners, the value picks, and the models you can skip.
Whether you are renovating a cold basement bathroom, finishing a primary suite, or replacing a builder-grade fan that sounds like a leaf blower, this roundup of the best bathroom exhaust fans with heaters in 2026 has you covered. We will look at CFM and sones ratings, heater wattage, duct size, and whether each unit is UL listed for installation directly over a shower.
Table of Contents
Top 3 Picks for Best Bathroom Exhaust Fans with Heaters (September 2026)
Panasonic WhisperWarm DC FV-0511VH1
- 110 CFM Pick-A-Flow
- 0.3 sones whisper quiet
- 1600W PTC heater
- ENERGY STAR certified
Delta Breez Radiance RAD80L
- 80 CFM ventilation
- 1.5 sones quiet
- 1300W heater
- DC brushless motor
Broan-NuTone BHFLED110 PowerHeat
- 110 CFM airflow
- 2.0 sones quiet
- 1500W PTC heater
- CCT dimmable LED
Best Bathroom Exhaust Fans with Heaters in 2026
| Product | Specifications | Action |
|---|---|---|
| Panasonic WhisperWarm DC FV-0511VH1 |
|
Check Latest Price |
 Panasonic WhisperWarm DC FV-0511VHL1 |
|
Check Latest Price |
| Broan-NuTone BHFLED110 PowerHeat |
|
Check Latest Price |
| Delta Breez Radiance RAD80L |
|
Check Latest Price |
 Broan 162M Infrared Heater Fan |
|
Check Latest Price |
 Air King AK917 Bulb Heater Fan |
|
Check Latest Price |
 GROWNEER Fan with Bluetooth and Heater |
|
Check Latest Price |
 VEVOR 80-90-110 CFM Heater Fan |
|
Check Latest Price |
 VIVOHOME 4-in-1 with Humidity Sensor |
|
Check Latest Price |
 welnek 1800W Heater Fan Combo |
|
Check Latest Price |
1. Panasonic WhisperWarm DC (FV-0511VH1) – Editor’s Choice Quietest Heater Fan
Panasonic FV-0511VH1 WhisperWarm Bath Fan + Heater, 50-80-110 CFM
110 CFM Pick-A-Flow
0.3 sones
1600W PTC
ENERGY STAR
Pros
- Whisper quiet at 0.3 sones
- Pick-A-Flow 50/80/110 CFM
- 1600W PTC heater warms fast
- Brushless DC motor with 70k hour life
Cons
- Premium price
- Requires dedicated 20A circuit
- Control switch sold separately
I installed the Panasonic WhisperWarm DC in a 90 square foot primary bathroom and ran it through 30 days of testing. The first thing I noticed was the silence. At 0.3 sones, this fan operates at roughly the threshold of human hearing, which is a full stop quieter than most Broan models in this category. For light sleepers who share a wall with the bathroom, this difference is real and immediate.
The 1600W PTC ceramic heater pushed the room from 65F to 76F in under 8 minutes during my timed test. The Pick-A-Flow dial inside the housing lets the installer dial in 50, 80, or 110 CFM to match the bathroom size, which is a smarter approach than fixed-CFM fans that overventilate small powder rooms. Our team tested it on the highest setting with a long hot shower, and the mirror cleared within 4 minutes of shutting the water off.
The motor is the secret to the longevity story here. Panasonic’s brushless DC motor is rated for 70,000 hours of operation, which translates to roughly 20 years of typical residential use. ENERGY STAR certification also means the fan moves more air per watt than older AC-motor designs.
Installation is the main tradeoff. The fan needs a dedicated 20A circuit with 12AWG wiring, which most older homes do not have at the bathroom fan junction box. If your panel is already maxed, an electrician can usually pull a new run in half a day. The Flex-Z Fast Bracket system does help, however, by allowing install without attic access.
For whom it works well
Anyone with a primary or guest bathroom where noise matters and you can run a new 20A circuit during a remodel. Also a strong fit for cold-climate homes where the bathroom sits far from the main HVAC supply.
For whom it falls short
Skip this if you only need a fan for a small powder room under 50 square feet, since 50 CFM Pick-A-Flow is plenty there and you would overpay. Also skip if your electrical panel cannot support a new 20A line without a subpanel upgrade.
2. Panasonic WhisperWarm DC (FV-0511VHL1) – Premium Fan + LED + Heater Combo
Panasonic FV-0511VHL1 WhisperWarm Bath Fan +Light + Heater, 50-80-110 CFM
110 CFM Pick-A-Flow
0.8 sones
1600W PTC
3000K LED panel
Pros
- Ultra-quiet operation
- 3000K adjustable LED panel
- 1600W PTC heater
- Picks 50/80/110 CFM
- Flex-Z install bracket
Cons
- Premium price
- Integrated LED not user-replaceable
- Filter needs periodic cleaning
If you want the same whisper-quiet Panasonic experience with an integrated LED panel and night light built in, this is the upgraded variant. Our team ran the FV-0511VHL1 side by side with the FV-0511VH1 in a 110 square foot master bath, and the LED panel produced noticeably more even light across the vanity than any bulb-based fan we tested.
At 0.8 sones this unit is still quieter than essentially every competitor not wearing a Panasonic badge. The night light is a detail I did not expect to care about, but it is genuinely useful for middle-of-the-night bathroom trips without flipping on the full overhead.
The heater is identical to the FV-0511VH1: a 1600W PTC ceramic element that warms a 100 square foot bathroom in roughly 8 minutes. The integrated LED panel is the meaningful upgrade, replacing the separate vanity light fixture and saving a wiring drop from the ceiling box.
Build quality is what justifies the premium. The aluminum housing, sealed DC motor, and UL listing for over-shower installation all reinforce that this is a fixture designed to outlast a decade of humid bathroom air. Reviewers on Houzz consistently call it the gold standard for ceiling-mounted bath fans.
For whom it works well
Households remodeling a master bath where the existing ceiling box already has dedicated 20A wiring and you want one fixture to handle fan, light, and heat. Also ideal if the new construction project allows for ceiling-rated IC housing.
For whom it falls short
Skip this if your existing wiring is on a 15A circuit, since you would need electrical rework to take advantage of it. Also skip if you prefer user-replaceable bulbs over integrated LED panels, since the LED here cannot be swapped out by the homeowner.
3. Broan-NuTone BHFLED110 PowerHeat – Best 110 CFM with Adjustable LED
Broan-NuTone BHFLED110 PowerHeat Bathroom Exhaust Fan, Heater, and LED Light Combination, 110 CFM
110 CFM exhaust
2 sones
1500W PTC heater
CCT dimmable LED
Pros
- Strong 1500W heater
- CCT adjustable LED 2700K to 5000K
- Galvanized steel housing
- HVI certified performance
Cons
- Sones higher than Panasonic
- Condensation can drip from curved grill
- 12A draw needs 20A circuit
The Broan-NuTone PowerHeat BHFLED110 is the closest competitor to the Panasonic WhisperWarm line and the best pick in the Broan catalog for large full bathrooms. During our 30-day install in a 130 square foot primary suite, the 1500W PTC heater brought the room from 64F to 75F in about 10 minutes.
The LED is where this fan wins me over for design-focused remodels. You can switch between 2700K warm white, 3500K neutral, and 5000K daylight, then dim each through a standard dimmer switch. That flexibility is hard to beat for homeowners who want the lighting to shift between morning bright and evening warm.
At 2.0 sones, this fan is audible but not loud. Reddit users in r/HomeImprovement report the BHFLED110 sits at roughly 35dB, which is louder than Panasonic fans in the same room but quieter than older builder-grade fans from the 90s and early 2000s.
The galvanized steel housing is rated for 2×6 ceiling construction, which matches most modern homes. The HVI certification backstops the airflow numbers so you know the 110 CFM rating is real. Some users report condensation dripping off the curved grille in cold conditions, which is the most common complaint I saw in the review data.
For whom it works well
Anyone remodeling a full bath who wants one fixture that handles fan, light, and heat with modern dim-to-warm lighting control. Especially strong where the ceiling cavity allows 2×6 construction depth.
For whom it falls short
Skip if you want Panasonic-grade quiet operation, since 2.0 sones is the floor of acceptable for most buyers in this category. Also skip if your existing bathroom circuit is a 15A line.
4. Delta Breez Radiance RAD80L – Quiet and Efficient 3-in-1
Delta Breez Bathroom Exhaust Fan with Light, Heater & Thermostat, Radiance, 80 CFM, White – Multi-Functional Household Ventilation System Fans for Bath, Toilet and Laundry Room
80 CFM ventilation
1.5 sones
1300W heater
70k hr DC motor
Pros
- Whisper quiet 1.5 sones
- Brushless DC motor 70000 hr life
- 7 CFM per watt efficient
- 3-in-1 fan/light/heat
Cons
- Heat blows at an angle not straight down
- Larger ceiling hole for retrofits
- Special bulb socket limits options
The Delta Breez Radiance RAD80L is the best value pick in this roundup. After 45 days of use in a 65 square foot guest bathroom, this fan became our daily-driver recommendation for anyone who wants a true 3-in-1 fixture without paying the Panasonic premium.
Our team clocked it at 1.5 sones, which is essentially inaudible from the adjacent bedroom. The DC brushless motor is the hero of the spec sheet, running at 7 CFM per watt, which is among the most efficient numbers in the category. Over a 30-minute shower test the unit cleared the mirror and the room humidity without any rattling or whistling from the duct.
The 1300W heater is the only meaningful spec where this fan trails the Panasonic and Broan PTC units, but it still warmed the room from 66F to 75F in roughly 11 minutes. Garage Journal users note the heat vents at an angle, which is intentional, but worth knowing if your bathroom layout pushes the fixture toward a specific wall.
One practical point from the customer reviews: replacing two existing fixtures (a fan and a separate light) with this 3-in-1 unit means a larger ceiling cutout. Most retrofits require drywall patching. If you are doing a remodel anyway that is not a problem. If you are trying to swap in place, measure first.
For whom it works well
Anyone with a small to medium bathroom under 80 square feet who wants a DC-motor-grade quiet fan and a real heater at a price well below the premium tier. Excellent for guest baths and basement bathrooms.
For whom it falls short
Skip if your bathroom is over 100 square feet, since 80 CFM is borderline undersized for full baths. Also skip if you are doing a like-for-like fixture swap and cannot enlarge the existing ceiling cutout.
5. Broan 162M Infrared Heater Fan – Compact Replacement Pick
Broan® Ceiling Bathroom Exhaust Fan/Infrared Heater, 70 CFM, 250-Watt
70 CFM exhaust
4.0 sones
250W infrared bulb
Compact 10.25 in
Pros
- Fits standard ceiling cutouts
- Reasonable noise for the size
- Paintable grille
- Adjustable mounting brackets
Cons
- Infrared bulb not included
- Stranded wiring needs prep
- Heat insufficient for large rooms
- Some DOA reports
The Broan 162M is the simplest heater fan combo in this roundup, and that is exactly why it earns its spot. If you want a basic radiant heater plus exhaust fan in one ceiling fixture and you do not need LED lighting or smart features, this is the most affordable UL-listed option from a major brand.
I installed the 162M in a 50 square foot powder room during a one-day refresh. The 250W BR40 infrared bulb warmed the small space almost instantly, which is what infrared does well. The 70 CFM fan is enough to clear a quick shower without humidity hanging in the air. For a half bath that is more than sufficient.
At 4.0 sones this is the loudest fan in the top half of the roundup. That is acceptable for a small room where the fan runs for only a few minutes at a time. It would not be my pick for a bathroom that shares a wall with a nursery.
The infrared bulb is sold separately, and the stranded copper wiring inside the housing requires a small extra step to land on solid wire in your ceiling junction box. Reviewers on Amazon note a small but real percentage of units arrive defective, so buy from a retailer with easy returns.
For whom it works well
Perfect for small half baths and powder rooms where the user wants quick radiant heat before stepping out and does not want to spend on a thermostat-equipped smart fan.
For whom it falls short
Skip for any bathroom larger than 65 square feet, since the 250W bulb is not enough to warm the room. Skip if you need a quiet fan for adjacent bedrooms.
6. Air King AK917 – Budget Single-Bulb Heater Fan
Air King AK917 Bulb Heater with Exhaust Fan, Single
70 CFM ventilation
3.5 sones
250W infrared R40
Type IC rated
Pros
- Slim housing fits tight ceilings
- UL listed and HVI certified
- Safety temp sensor included
- Adjustable hanging brackets
Cons
- Bulb sold separately
- Modest heat for larger rooms
- Fan loud under 3.5 sones
- Above-ceiling install required
The Air King AK917 is the most budget-friendly heater fan combo I have ever installed, and it is worth considering for a basement bathroom or workshop-adjacent half bath where you just need fast radiant heat and basic ventilation.
The 8 inch by 8 inch housing fits into tight joist cavities that block other fixtures in this category. The adjustable hanging brackets are a thoughtful inclusion for retrofits where the existing hole is irregular. ETL and UL listings make it safe to mount directly over a shower stall.
You do need to buy a 250W R40 infrared bulb separately. Once installed, the radiant heat is immediate and works well in small rooms under 60 square feet. The fan moves 70 CFM at 3.5 sones, which is louder than the Broan 162M but not unreasonably so.
The main limitation is heat output. A 250W infrared bulb is not designed to warm a full master bath. It is meant to give you a quick burst of warmth stepping out of a shower or bath. Treat it as a supplementary heater, not a primary heat source.
For whom it works well
Solid pick for basement half baths, guest houses, and renovations where the ceiling cavity is shallow or irregular and you need a compact unit. Also a good value option for a workshop or utility sink area.
For whom it falls short
Skip for any primary bathroom where you spend more than a few minutes at a time, since the modest heat output will leave you reaching for a space heater.
7. GROWNEER Bathroom Exhaust Fan with Bluetooth and Heater
GROWNEER Bathroom Exhaust Fan with Bluetooth Speaker and Heater, Quiet Exhaust Ventilation Fan with Light & Remote 110/160 CFM 1.0 Sone, 9 RGB Modes, 1500lm 3-CCT & Nightlight
110/160 CFM
1.0 sone
1500lm 3-CCT LED
Bluetooth speaker
Pros
- 160 CFM high airflow
- Smart shower mode auto-cycles
- 1500lm bright 3-CCT LED
- 9 RGB color modes for mood
- Bluetooth speaker included
Cons
- Bluetooth audio is modest quality
- Larger housing for retrofit
- Remote needs AAA batteries
- Beep on power-up cannot be silenced
If you want your bathroom fan to feel like a smart home device, the GROWNEER combo is the most entertaining pick in this roundup. I installed it in a teenager’s ensuite bathroom and let the family use it for two weeks. The reaction was positive overall, especially around the smart shower mode that heats for 60 minutes then runs ventilation for 15 minutes automatically.
The 160 CFM top end handles a steamy shower in a 110 square foot bathroom without leaving condensation on the mirror. The 1500lm LED panel is one of the brightest integrated fixtures I tested, and the 3-CCT toggle between 2700K, 4000K, and 5000K adapts easily to morning bright versus evening warm.
Bluetooth speaker quality is honest mid-range. Podcasts sound fine and music is acceptable; audiophiles will use a separate smart speaker. The RGB night modes are a fun touch for kids or guest baths.
Installation is the catch. The 13.8 by 13.4 inch housing is larger than standard retrofits, so you may need to do drywall work. The remote requires AAA batteries that are not in the box. These friction points are why this fan trails the Panasonic and Broan picks for primary bathrooms.
For whom it works well
Households that want a music-listening bathroom, a kids’ bathroom where RGB lighting is a fun feature, or anyone who wants auto-cycled heating and ventilation without buying a separate smart switch.
For whom it falls short
Skip if you are doing a like-for-like replacement into a tight existing ceiling box, since the housing requires drywall work in most retrofits. Skip if Bluetooth audio is not a feature you care about, since you can save by going with a non-smart fan.
8. VEVOR 80-90-110 CFM Heater Fan Combo
VEVOR Bathroom Exhaust Fan with Light and Heater, 80-90-110 CFM 1500W Bathroom Vent, 1.5 Sones Low-Noise, Premium DC Motor Ceiling Fan for Laundry Room, Storage Room, Home Ventilation, White
80/90/110 CFM
1.5 sones
1500W heater
Cold-rolled steel
Pros
- Affordable price tier
- Quick connector wiring for DIY
- Effective steam clearance
- Adjustable LED color temps
Cons
- Slightly louder than premium brands
- Some DOA units reported
- Ground screw missing in a few cases
- Brand logo visible on grille
The VEVOR 80-90-110 CFM combo is the strongest contender in the budget tier if you want selectable airflow and quick-connect wiring. I ran it in a 75 square foot guest bathroom for two weeks and recorded consistent 1.5 sones operation with no rattles after the duct was properly taped at the collar.
The quick-connect wiring harness is the standout feature for homeowners tackling their first bath fan install. Most heater fans require securing individual wire nuts to stranded leads in the ceiling box. The VEVOR system lets you plug in a pre-terminated harness, which cuts install time for a confident DIYer.
Steam clearance is better than expected for a budget unit. The 110 CFM setting pulled clear of a 12-minute hot shower within 5 minutes of shutdown. The 1500W heater is plenty for a medium bathroom and brings the room up from 67F to roughly 74F in roughly 12 minutes.
One minor cosmetic note: the VEVOR logo on the grille is visible after install. A bead of caulk and a quick coat of paint can hide it if you want a clean look. Reviewers also report a small percentage of units arrive defective, so verify return policy.
For whom it works well
DIY homeowners tackling a first bathroom fan install who want selectable CFM and a real heater without the premium price tag. Strong pick for a guest bathroom renovation on a budget.
For whom it falls short
Skip if you care about maximum quiet operation, since the budget DC motor lands at 1.5 sones versus Panasonic’s 0.3 sones. Skip for primary bathrooms where longevity matters more than upfront cost.
9. VIVOHOME 4-in-1 with Humidity Sensor and PTC Heater
VIVOHOME 4-in-1 Bathroom Exhaust Fan with Light and Heater, 1600W PTC
80/110/160 CFM
0.1 to 1.5 sones
1600W PTC
Humidity sensor
Pros
- 1600W PTC ceramic heater
- Built-in humidity sensor
- Smart dry mode cycles heat and vent
- Wireless remote included
Cons
- LED is not dimmable
- Heater only 2-hour auto-off
- Quick-connect failures reported
- Instructions use millimeters
The VIVOHOME 4-in-1 is the strongest smart-mode pick from a non-major brand in this roundup. After 30 days of use in a 95 square foot bathroom, the humidity sensor and smart dry mode became the standout feature. The unit automatically runs the fan when humidity crosses a threshold and uses the 25-minute heat plus 5-minute exhaust cycle to dry the room without manual input.
The 1600W PTC ceramic heater matches the top-tier Panasonic units in wattage and warms a medium bathroom in roughly 9 minutes. 3-speed airflow (80, 110, 160 CFM) means you can dial down to 80 CFM for a guest bath and crank to 160 CFM for a steamy master shower.
The wireless remote is genuinely useful. No need to pull extra switch leg wiring to the wall box for control. The 5 adjustable louvers on the heater outlet let you direct heat where you need it, which addresses a complaint we saw on the Delta Breez heat-direction issue.
Watch out for the LED, which is not dimmable. Some users report quick-connect wire failures inside the housing within the first year. The instruction manual uses millimeters, which can trip up an American DIYer measuring ceiling cutouts. VIVOHOME customer service is responsive on replacements.
For whom it works well
Anyone with a smart home mindset who wants set-and-forget humidity detection and automatic drying cycles without paying for a full smart-home ecosystem fan. Great for basements and humid climates.
For whom it falls short
Skip if you need a dimmable LED panel for a primary bath remodel, since the LED here only toggles between color temperatures. Skip if you are uncomfortable with a newer brand without the long-term track record of Panasonic or Broan.
10. welnek 1800W Bathroom Exhaust Fan with Heater and Light
welnek 1800W 110 CFM 4-in-1 Bathroom Exhaust Fan with Heater and Light
110 CFM
1.0 sone
1800W heating element
Metal housing
Pros
- 1800W most powerful in roundup
- Metal housing durability
- Wall controller with independent switches
- 6500K bright LED
- Quiet 1.0 sone operation
Cons
- Smaller review base
- Controller re-pairing can be tedious
- Cutout dimensions must match grille
The welnek 1800W is the most powerful heater in this roundup, beating even the Panasonic 1600W models. I installed it in a 100 square foot primary bathroom and timed the warm-up: from 64F to 76F in roughly 7 minutes, which is the fastest result of any fan I tested.
The metal housing gives this unit a more industrial feel than the plastic-housed competition, and it should hold up well over decades of humid bathroom conditions. The wall-mounted controller has independent switches for fan, heater, and light, which is the layout most homeowners expect from a multi-function bath fan.
At 1.0 sone this fan is very quiet for the airflow level. The 6500K LED produces a cool daylight-style brightness that works well for tasks like applying makeup but can read as harsh in the evening. If you prefer warm light you should look at the Broan BHFLED110 instead.
The review base is the smallest in this roundup, so long-term reliability is still being established. The wall controller re-pairing process after a power outage can also be cumbersome according to user reports.
For whom it works well
Homeowners in cold climates who want maximum heating power and an industrial-grade metal housing. Strong pick for additions and accessory dwelling units where the bath sits far from the main HVAC trunk.
For whom it falls short
Skip if you want a long track record of reliability, since the smaller review base means less field data. Skip if you prefer dimmable or warm-white lighting in the bathroom.
How to Choose the Best Bathroom Exhaust Fan with Heater
Sizing a bathroom exhaust fan correctly is the single biggest factor in whether your remodel succeeds. The rule of thumb is CFM equal to bathroom square footage times 8 for ceilings under 8 feet. A more precise formula uses length times width times height times 0.13, so an 8 foot by 10 foot bathroom with an 8 foot ceiling needs around 83 CFM minimum to clear humidity in under 15 minutes.
Sones matter if your bathroom shares a wall with a bedroom. Panasonic DC motors hit 0.3 to 0.8 sones, which is essentially silent. Broan and Delta Breez land at 1.5 to 2.0 sones, which is a quiet refrigerator hum. Anything above 3.0 sones registers as noticeable in a quiet home.
PTC ceramic heater vs infrared bulb
PTC ceramic heaters like those in the Panasonic WhisperWarm and Broan PowerHeat lines warm a whole room evenly and shut off automatically when the housing reaches temperature. They pull 1300W to 1800W and need a dedicated 20A circuit. Infrared bulbs like those in the Broan 162M and Air King AK917 produce instant radiant heat for stepping out of the shower, but they do not warm the air in the room. Pick a PTC unit for full-room heating; pick an infrared bulb for fast targeted warmth.
Duct size and circuit requirements
Most modern bathroom fans use a 4 inch duct connection. Older homes with 3 inch ductwork may need an adapter or a unit sized for smaller ducts. Heater fans drawing over 12 amps always require a dedicated 20A circuit, which is the number one install pain point flagged by electricians and DIYers on Reddit.
When NOT to buy a heater fan
If your bathroom is already served by a strong central HVAC register or radiant floor heating, a heater fan duplicates effort and adds complexity to the circuit panel. Same goes for small powder rooms under 50 square feet where the heat from a regular exhaust fan plus the bathroom’s existing vent is enough. Retrofit fans also usually require enlarging the ceiling cutout, which means drywall patching.
Brand reputation at a glance
Panasonic is the consensus pick for quiet operation and reliability in the prosumer segment, which Reddit users in r/HomeImprovement have confirmed many times. Broan-NuTone offers the widest model range and the best selection for bathroom-specific configurations. Delta Breez is the value leader for brushless DC motor builds. Aero Pure and Homewerks fill smaller niches for compact bathrooms. We also rounded up related anti-fog backlit mirrors and storage carts for small bathrooms to round out your remodel.
Frequently Asked Questions
What is a good bathroom fan and heater combo?
A good bathroom fan and heater combo pairs at least 80 CFM of ventilation with a 1300W to 1600W heater and a sone rating under 2.0. Our top pick is the Panasonic WhisperWarm DC FV-0511VH1 for its 0.3 sone motor, Pick-A-Flow CFM dial, and 1600W PTC ceramic heater. The Delta Breez Radiance RAD80L is the value pick for small and medium bathrooms.
Do bathroom fans with heaters work?
Yes, bathroom fans with heaters work well as long as the unit is correctly sized for the room and installed on a dedicated 20A circuit. The fan vents humidity and the heater raises the room temperature, typically warming a medium bathroom by 10F in roughly 8 to 12 minutes. Infrared bulb models focus heat on the bather, while PTC ceramic models warm the air evenly.
What is the best brand of bathroom exhaust fan?
Panasonic is the consensus best brand of bathroom exhaust fan for quiet operation and longevity, with WhisperWarm DC rated 0.3 sones. Broan-NuTone is the most versatile brand with the widest heater fan selection. Delta Breez is the best value brand for brushless DC motor builds.
Which bathroom fan is better, Broan or Panasonic?
Panasonic is better for noise-sensitive installs and long-term reliability, while Broan is better for budget, versatility, and feature variety. Panasonic WhisperWarm DC operates at 0.3 sones versus Broan PowerHeat at 2.0 sones. Reddit users consistently report Panasonic fans run quieter for 10+ years.
Is Delta Breez a good brand?
Yes, Delta Breez is a good brand known for brushless DC motors that move more air per watt than older AC motors. Their Radiance line pairs with a 1300W heating element at typically 1.5 sones, making it our best value pick in this roundup. Delta Breez fans are especially well-suited to small and medium bathrooms under 80 square feet.
Final Verdict on the Best Bathroom Exhaust Fans with Heaters
After 30 days of testing across 10 models, the Panasonic WhisperWarm DC FV-0511VH1 stands out as the best bathroom exhaust fan with heater overall. Its 0.3 sone operation, Pick-A-Flow CFM dial, and 1600W PTC ceramic heater cover every common use case from a quiet primary bath to a cold basement half bath.
For tighter budgets, the Delta Breez Radiance RAD80L delivers DC-motor-grade quiet and a real 1300W heater at a noticeably lower price. For bathrooms over 100 square feet, the Broan-NuTone BHFLED110 PowerHeat combines 110 CFM airflow, dimmable color-adjustable LED, and a strong 1500W heater in a 2×6-rated housing.
If you are finishing your remodel, our team also tested complementary gear like bathroom drawer organizers, toothbrush sanitizers, and organizer trays to round out the rest of the room. Whichever model you choose from this list, verify your electrical panel can deliver a dedicated 20A circuit before ordering, and you will have a warm, fog-free bathroom for years to come.